Smc-networks SMC TigerAccess SMC7824M/FSW Instrukcja Użytkownika Strona 545

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 748
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 544
NEGOTIATION
24-5
negotiation
This command enables autonegotiation for a given interface. Use the no
form to disable autonegotiation.
Syntax
[no] negotiation
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
When auto-negotiation is enabled the switch will negotiate the best
settings for a link based on the capabilities command. When
auto-negotiation is disabled, you must manually specify the link
attributes with the speed-duplex and flowcontrol commands.
If autonegotiation is disabled, auto-MDI/MDI-X pin signal
configuration will also be disabled for the RJ-45 ports.
Example
The following example configures port 11 to use autonegotiation.
Related Commands
capabilities (24-6)
speed-duplex (24-3)
Console(config)#interface ethernet 1/11
Console(config-if)#negotiation
Console(config-if)#
Przeglądanie stron 544
1 2 ... 540 541 542 543 544 545 546 547 548 549 550 ... 747 748

Komentarze do niniejszej Instrukcji

Brak uwag