Smc-networks SMC TigerAccess SMC7824M/FSW Instrukcja Użytkownika Strona 217

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 748
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 216
C
ONFIGURING
R
ATE
L
IMITS
9-27
Command Attribute
Rate Limit – Sets the output rate limit for an interface.
Default Status – Disabled
Default Rate – Fast Ethernet: 100 Mbps; Gigabit Ethernet: 1000 Mbps
Range – Fast Ethernet: 1 - 1000 Mbps; Gigabit Ethernet: 1 - 1000 Mbps
Web - Click Port, Rate Limit, Input/Output Port/Trunk Configuration.
Set the Input Rate Limit Status or Output Rate Limit Status, then set the
rate limit for the individual interfaces, and click Apply.
Figure 9-11 Rate Limit Configuration
CLI - This example sets the rate limit for input and output traffic passing
through port 1 to 60 Mbps.
Console(config)#interface ethernet 1/1 24-2
Console(config-if)#rate-limit input 60 27-2
Console(config-if)#rate-limit output 60
Console(config-if)#
Przeglądanie stron 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 747 748

Komentarze do niniejszej Instrukcji

Brak uwag