SMC Networks SMC8606T Instrukcja Użytkownika Pobierz pdf (Strona 142)

NTERFACE

3-46

Port Menus

Port Information

The Port Information screen displays the port status, link state, the

communication speed and duplex mode, as well as the flow control in

use. To change any of the port settings, use the Port Configuration

menu. The parameters shown in the following figure and table are for

the RJ-45 ports.

Note: The port information displayed is not valid if the link status is

down.

Port Configuration

Use the Port Configuration menus to configure any port on the

Parameter Description

Admin Status Shows if the port is enabled or not.

Link Status Indicates if the port has a valid connection to an

external device.

Speed Status Shows the port speed (1000M, 100M, or 10M).

Duplex Status Displays the current duplex mode.

Flow Control Status Shows the flow control type in use. Flow control can

eliminate frame loss by “blocking” traffic from end

stations connected directly to the switch. Back pressure

is used for half duplex and IEEE 802.3x for full duplex.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 181 182

Brak uwag

SMC Networks SMC8606T Instrukcja Użytkownika Strona 142