SMC Networks VDSL2 Instrukcja Użytkownika Pobierz pdf (Strona 48)

NSTALLING

THE

WITCH

3-10

and without disrupting the operation of the devices attached to the

unit.

Connecting to the Console Port

The RJ-45 serial port on the switch’s front panel is used to connect to the

switch for out-of-band console configuration. The on-board configuration

program can be accessed from a terminal or a PC running a terminal

emulation program. The pin assignments used to connect to the serial port

are provided in the following table.

Figure 3-9 Serial Port (RJ-45) Pin-Out

Wiring Map for Serial Cable

Table 3-2 Wiring Map for Serial Cable

Switch’s 8-Pin

Serial Port

Null Modem PC’s 9-Pin

DTE Port

6 RXD (receive data) <---------------------------- 3 TXD (transmit data)

3 TXD (transmit data) -----------------------------> 2 RXD (receive data)

5 SGND (signal ground) ------------------------------ 5 SGND (signal ground)

No other pins are used.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 95 96

Brak uwag

SMC Networks VDSL2 Instrukcja Użytkownika Strona 48