SMC Networks TigerSwitch Instrukcja Użytkownika Strona 446

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 518
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 445
C
OMMAND
L
INE
I
NTERFACE
4-204
Related Commands
switchport mode (4 -202)
switchport ingress-filtering
This command enables ingress filtering for an interface. Use the no form
to restore the default.
Syntax
[no] switchport ingress-filtering
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Ingress filtering only affects tagged frames.
If ingress filtering is disabled and a port receives frames tagged for
VLANs for which it is not a member, these frames will be flooded to
all other ports (except for those VLANs explicitly forbidden on this
port).
If ingress filtering is enabled and a port receives frames tagged for
VLANs for which it is not a member, these frames will be discarded.
Ingress filtering does not affect VLAN independent BPDU frames,
such as GVRP or STA. However, they do affect VLAN dependent
BPDU frames, such as GMRP.
Example
The following example shows how to set the interface to port 1 and then
enable ingress filtering:
Console(config)#interface ethernet 1/1
Console(config-if)#switchport ingress-filtering
Console(config-if)#
Przeglądanie stron 445
1 2 ... 441 442 443 444 445 446 447 448 449 450 451 ... 517 518

Komentarze do niniejszej Instrukcji

Brak uwag