SMC Networks SMC2804WBR V.2 Instrukcja Użytkownika

Hardware Description7• One RJ-45 port for connection to a DSL or cable modem (WAN). This port also auto-negotiates operating speed to 10/100 Mbps, the

Installing the Wireless Barricade™ g Router8System RequirementsYou must have an ISP that meets the following minimum requirements:• Internet access fr

Connect the System9Basic Installation Procedure1. Connect the LAN: Connect the Wireless Barricade™ to your PC, or to a hub or switch. Run Ethernet cab

Installing the Wireless Barricade™ g Router10Attach to Your Network Using Ethernet CablingThe four LAN ports on the Wireless Barricade™ auto-negotiate

Connect the System11Attach to Your Network Using Radio SignalsInstall a wireless network adapter in each computer that will be connected to the Intern

Installing the Wireless Barricade™ g Router12A wireless infrastructure can be used for access to a central database, or for connection between mobile

Connect the System13Note: When connecting to the WAN port, use 100-ohm Category 3, 4, or 5 shielded or unshielded twisted-pair cable with RJ-45 connec

15CONFIGURINGCLIENT TCP/IPIf you have not previously installed the TCP/IP protocols on your client PCs, refer to the following section. If you need in

Configuring Client TCP/IP165. Select Microsoft in the manufacturers list. Select TCP/IP in the Network Protocols list. Click the OK button to return t

Installing TCP/IP174. Double-click Protocol.5. Choose Internet Protocol (TCP/IP). Click the OK button to return to the Network window.6. The TCP/IP pr

BarricadeTM g 2.4 GHz 54 Mbps Wireless Cable/DSL Broadband RouterFrom SMC’s Barricade line of Broadband RoutersNovember 2003Revision Number: V.2 R01

Configuring Client TCP/IP18Setting Up TCP/IPTo access the Internet through the Wireless Barricade™, you must configure the network settings of the com

Setting Up TCP/IP193. On the Network window Configuration tab, double-click the TCP/IP entry for your network card.4. Click the IP Address tab.5. Clic

Configuring Client TCP/IP208. On the Network Properties Window, click the OK button to save these new settings.Note: Windows may ask you for the origi

Setting Up TCP/IP21Configuring Your Computer in Windows NT 4.01. From the Windows desktop click Start/Settings/Control Panel.2. Double-click the Netwo

Configuring Client TCP/IP227. Click on "Obtain an IP address from a DHCP server."8. Click OK to close the window.9. Windows may copy files a

Setting Up TCP/IP233. Type IPCONFIG /RENEW and press the <ENTER> key. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.

Configuring Client TCP/IP243. Locate and double-click the Local Area Connection icon for the Ethernet adapter that is connected to the Wireless Barric

Setting Up TCP/IP252. Locate and double-click the Local Area Connection icon for the Ethernet adapter that is connected to the Wireless Barricade™. Ne

Configuring Client TCP/IP262. Make sure that Built-in Ethernet is selected in the Show field. 3. On the TCP/IP tab, select Using DHCP in the Configure

Setting Up TCP/IP272. In the Gateway tab, add the IP address of the Wireless Barricade™(default: 192.168.2.1) in the New gateway field and click Add.3

iTABLE OF CONTENTSAbout the Wireless Barricade™ g Router . . . . . . 1Important information! . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuring Client TCP/IP28Verifying Your TCP/IP ConnectionAfter installing the TCP/IP communication protocols and configuring an IP address in the sa

29CONFIGURING THE WIRELESSBARRICADE™ G ROUTERThe Wireless Barricade™ g Router can be configured by Internet Explorer 5.0 or above. Using the web manag

Configuring the Wireless Barricade™ g Router30Disable Proxy ConnectionYou will also need to verify that the HTTP Proxy feature of your web browser is

Navigating the Web Browser Interface31Navigating the Web Browser InterfaceTo access the Wireless Barricade™’s management interface, enter the Wireless

Configuring the Wireless Barricade™ g Router32The Wireless Barricade™’s management interface features a Setup Wizard and an Advanced Setup section. Us

Setup Wizard33Setup WizardTime ZoneClick on the Setup Wizard picture. The first item in the Setup Wizard is Time Zone setup.For accurate timing of cli

Configuring the Wireless Barricade™ g Router34Broadband TypeSelect the type of broadband connection you have.For a cable modem connection see the foll

Setup Wizard35Cable ModemYour Internet Service Provider may have given you a host name. If so, enter it into the field.Click Finish to complete the se

Configuring the Wireless Barricade™ g Router36PPPoE xDSLEnter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is

Setup Wizard37Point-to-Point Tunneling Protocol (PPTP) Point-to-Point Tunneling Protocol is a common connection method used for xDSL connections in Eu

Table of ContentsiiWAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48LAN . . . . . . . . . . . . . . . . . . . .

Configuring the Wireless Barricade™ g Router38BigPondIf you use the BigPond Internet Service which is available in Australia, enter the the user name,

Advanced Setup39Wireless Configures the radio frequency, SSID, WPA/WEP encryption, and 802.1x for wireless communications.Firewall Configures a variet

Configuring the Wireless Barricade™ g Router40SystemTime ZoneSet the time zone and time server for the Wireless Barricade™. This information is used f

Advanced Setup41• Set date and time using PC's date and timeClick on the radio button for synchronizing the Wireless Barricade™’s internal clock

Configuring the Wireless Barricade™ g Router42Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the login sessio

Advanced Setup43ZoneAlarm Pro® with Web Filtering SetupEvery PC connected to the Internet is a potential target. Even a novice hacker can easily initi

Configuring the Wireless Barricade™ g Router44• Privacy protection to keep your identity and web-surfing habits confidential with features such as coo

Advanced Setup45• License KeyThe License Key field is optional. To input your ZAP License Number, type in or paste the license number you received at

Configuring the Wireless Barricade™ g Router46• ZoneAlarm Pro Security LevelThe overhead for communication between the router and Zone Alarm Pro with

Advanced Setup47• To IP AddressInput the last three digits of the last IP Address from the range of IP addresses that you would like to exempt from th

1ABOUT THE WIRELESSBARRICADE™ G ROUTERCongratulations on your purchase of the Wireless Barricade™ g Broadband Router. SMC is proud to provide you with

Configuring the Wireless Barricade™ g Router48WANSpecify the WAN connection type provided by your Internet Service Provider, then click More Configura

Advanced Setup49Point-to-Point Over Ethernet (PPPoE)Enter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is norm

Configuring the Wireless Barricade™ g Router50Point-to-Point Tunneling Protocol (PPTP)Point-to-Point Tunneling Protocol (PPTP) can be used to join dif

Advanced Setup51Static IP AddressIf your Internet Service Provider has assigned a fixed IP address, enter the assigned address and subnet mask for the

Configuring the Wireless Barricade™ g Router52BigPondBigPond is a service provider in Australia that uses a heartbeat system to maintain the Internet

Advanced Setup53DNSDomain Name Servers map numerical IP addresses to the equivalent domain name (e.g., www.smc.com or www.smc-europe.com). Your ISP sh

Configuring the Wireless Barricade™ g Router54LAN• LAN IP – Use the LAN menu to configure the LAN IP address for the Wireless Barricade™ and to enable

Advanced Setup55WirelessTo configure the Wireless Barricade™ as a wireless access point for wireless clients (either stationary or roaming), all you n

Configuring the Wireless Barricade™ g Router56Wireless Mode: Set the communication mode for the Wireless Barricade™. Default: Long Range Mixed (11b+11

Advanced Setup57SecurityIf you are transmitting sensitive data across wireless channels, you should enable Wi-Fi Protected Access (WPA) or Wired Equiv

About the Wireless Barricade™ g Router2In order to counter such incalculable activity and protect yourself from higher than expected on-line costs we

Configuring the Wireless Barricade™ g Router58WPA Encryption Type WPA is a stronger wireless security solution than WEP. It uses a combination of 802.

Advanced Setup59WEP Encryption Type You can choose between standard 40-bit/64-bit or the more robust 128-bit encryption.You may manually enter the key

Configuring the Wireless Barricade™ g Router60If you use encryption, configure the same keys used for the Wireless Barricade™ on each of your wireless

Advanced Setup61NAT - Network Address TranslationFrom this section you can configure the Address Mapping, Virtual Server, and Special Application feat

Configuring the Wireless Barricade™ g Router62Virtual ServerIf you configure the Wireless Barricade™ as a virtual server, remote users accessing servi

Advanced Setup63Special ApplicationsSome applications, such as Internet gaming, videoconferencing, Internet telephony and others, require multiple con

Configuring the Wireless Barricade™ g Router64Popular applications requiring multiple ports are listed in the Popular Applications field. From the dro

Advanced Setup65FirewallThe Wireless Barricade™ firewall can provide access control of connected client PCs, block common hacker attacks, including IP

Configuring the Wireless Barricade™ g Router66MAC Filtering Table

Advanced Setup67The MAC Filtering feature of the Wireless Barricade™ allows you to control access to your network for up to 32 clients based on the MA

Features and Benefits3Features and Benefits• Internet connection to DSL or cable modem via a 10/100 Mbps WAN port.• Local network connection via 10/10

Configuring the Wireless Barricade™ g Router68Schedule Rule The Schedule Rule feature allows you to configure specific rules based on Time and Date. T

Advanced Setup69Enables Schedule-based Internet access control.1. Click Add Schedule Rule.2. Define the settings for the schedule rule (as shown on th

Configuring the Wireless Barricade™ g Router70Intrusion Detection• SPI and Anti-DoS (Denial-of-Service) firewall protection (Default: Enable) The Intr

Advanced Setup71DMZ (Demilitarized Zone)If you have a client PC that cannot run an Internet application properly from behind the firewall, then you ca

Configuring the Wireless Barricade™ g Router72DDNS (Dynamic DNS) Settings

Advanced Setup73Dynamic DNS (DDNS) provides users on the Internet with a method to tie their domain name to the router or server. DDNS allows your dom

Configuring the Wireless Barricade™ g Router74UPnP (Universal Plug and Play) SettingEnable UPnP by checking ON in the screen above. UPnP allows the de

Advanced Setup75ToolsUse the Tools menu to back up the current configuration, restore a previously saved configuration, restore factory settings, upda

Configuring the Wireless Barricade™ g Router76Tools – Firmware UpgradeUse this screen to update the firmware or user interface to the latest versions.

Advanced Setup77Tools – ResetClick APPLY to reset the Wireless Barricade™. The reset will be complete when the power LED stops blinking. Note: If you

5INSTALLING THE WIRELESSBARRICADE™ G ROUTERBefore installing the Wireless Barricade™ g Broadband Router, verify that you have all the items listed und

Configuring the Wireless Barricade™ g Router78StatusThe Status screen displays WAN/LAN connection status, firmware, and hardware version numbers, ille

79TROUBLESHOOTINGThe information outlined in this section describes some useful steps for getting your computer and the Wireless Barricade™ online.A.

Troubleshooting80If you have an IP address that starts with 169.254.XXX.XXX then see the next section.If you have another IP address configured, then

Troubleshooting812. Type ipconfig/release.3. Then type ipconfig/renew. D. The 10/100 LED does not light after a connection is made1. Check that the ho

83SPECIFICATIONSBelow is an outline of the technical specifications for the SMC2804WBR.StandardsIEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fa

Specifications84Indicator PanelPower, WLAN, WAN (Link, Activity), LAN (Link/Activity, Speed - 10/100 Mbps)Dimensions130 x 85 x 32 mmWeight370 gInput P

Specifications85CompliancesCE MarkEmissionsFCC Class BVCCI Class BIndustry Canada Class BEN55022 (CISPR 22) Class BC-Tick - AS/NZS 3548 (1995) Class B

iCOMPLIANCESFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B di

CompliancesiiEC Conformance Declaration - Class BSMC contact for these products in Europe is:SMC Networks Europe,Edificio Conata II,Calle Fructuós Gel

CompliancesiiiIndustry Canada - Class BThis digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as s

Installing the Wireless Barricade™ g Router6Hardware DescriptionThe Wireless Barricade™ can be connected to the Internet or to a remote site using its

CompliancesivWichtige Sicherheitshinweise (Germany)1. Bitte lesen Sie diese Hinweise sorgfältig durch.2. Heben Sie diese Anleitung für den späteren

vLEGAL INFORMATIONAND CONTACTSSMC's Limited Warranty StatementSMC Networks Europe ("SMC") warrants its products to be free from defects

Legal Information and ContactsviINCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AU

Legal Information and ContactsviiStatement of ConditionsIn line with our continued efforts to improve internal design, operational function, and/or re

Model Number: SMC2804WBR V.2