SMC Networks SMC6724L3 Instrukcja Użytkownika Pobierz pdf (Strona 503)

100

101

IP I

NTERFACE

OMMANDS

4-217

You can manually configure a specific IP address, or direct the device

to obtain an address from a BOOTP or DHCP server. Valid IP

addresses consist of four numbers, 0 to 255, separated by periods.

Anything outside this format will not be accepted by the configuration

program.

• An interface can have only one primary IP address, but can have many

secondary IP addresses. In other words, you will need to specify

secondary addresses if more than one IP subnet can be accessed via

this interface.

• If you select the bootp or dhcp option, IP is enabled but will not

function until a BOOTP or DHCP reply has been received. Requests

will be broadcast periodically by this device in an effort to learn its IP

address. (BOOTP and DHCP values can include the IP address,

default gateway, and subnet mask).

• You can start broadcasting BOOTP or DHCP requests by entering an

ip dhcp restart client command, or by rebooting the router.

Notes: 1. Each VLAN group can be assigned its own IP interface

address. Therefore, if routing is enabled, you can manage

the router via any of these IP addresses.

2. Before you can change the primary IP address on an

interface, you must first clear the current address with the

no form of this command.

Example

In the following example, the device is assigned an address in VLAN 1.

Related Commands

ip dhcp restart client (4-98)

Console(config)#interface vlan 1

Console(config-if)#ip address 192.168.1.5 255.255.255.0

Console(config-if)#

1 2 ... 498 499 500 501 502 503 504 505 506 507 508 ... 617 618

Komentarze do niniejszej Instrukcji

Brak uwag

SMC Networks SMC6724L3 Instrukcja Użytkownika Strona 503

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie SMC Networks SMC6724L3