SMC Networks 11N Instrukcja Użytkownika Pobierz pdf (Strona 48)

AP Mode Configuration

5-4

Use Mac Address — Click the button to display the physical layer address of the

access point.

Security Setting — Configure the authentication and encryption.

• Authentication Type – Selects the wireless security mechanism for the network.

- Open – Accepts any client attempting to connect to the access point without

verifying its identity.

- Shared – Uses Wired Equivalent Privacy (WEP) to verify client identity by

distributing a shared key to clients.

- WPA-PSK – Use pre-shared key authentication for WPA-compliant clients.

- WPA2-PSK – Use pre-shared key authentication for WPA2-compliant clients.

- WPA-PSK / WPA2-PSK – Use pre-shared key authentication for WPA- and

WPA2-compliant clients when they coexist in the same network.

• Encryption Type – Selects the encryption cipher to use for multicast and unicast

data traffic.

- Not Use – No encryption is used.

- WEP – Uses WEP shared keys.

- TKIP – Uses TKIP keys for both multicast and unicast encryption..

- AES – Uses AES keys for both multicast and unicast encryption.

- Both – Uses TKIP for the multicast cipher and TKIP or AES for the unicast cipher

depending on the capability of associated clients.

• Pre-shared Key – Enter a key as an easy-to-remember form of letters and

numbers. The key must be from 8 to 32 characters, which can include spaces. All

wireless clients must be configured with the same key to communicate with the

access point.

• Group Rekey Interval – Enter the group key renewal time. This feature is only

avaliable when WPA-PSK encryption is used.

• WEP Key – Only avaliable when WEP encryption is selected. Standard keys are

either 5 or 13 alpanumeric characters; or 10 or 32 hexadecimal digits. Check the

Show Password box to display password characters as you type instead of

asterisks.

Click OK to confirm the configuration or click Cancel to cancel the settings.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Brak uwag

SMC Networks 11N Instrukcja Użytkownika Strona 48