SMC Networks SMC6709L2 Instrukcja Użytkownika Pobierz pdf (Strona 131)

RUNK

ONFIGURATION

(

TRKGRP

)

5-9

Trunk Configuration (trkgrp)

The Trunk configuration commands include the following items.

Trunk Commands

add trkgrp <1~4> lacp <on|off> workports <1~8> ports <portlist>

Creates a trunk group.

lacp – Set “on” for dynamic trunks or “off” for static trunks. (Enable STP for LACP.)

workports – The number of active ports used for an LACP trunk.

(Workports must be less than or equal to the number of port members.)

add trkgrp <1~4> ports <1-8>

Adds ports to an existing trunk group.

config trksyspri <1~65535>

Specifies the system priority used to select the device that initiates an LACP trunk. The

device with the lowest value (i.e., highest priority) is selected as the active LACP partner.

config trkgrp <1~4> workports <1~8>

Sets the number of active ports for an LACP trunk.

enable lacpstate ports <portlist>

Sets the specified port member(s) to actively initiate an LACP trunk.

disable lacpstate ports <portlist>

Sets the specified port member(s) to respond to a partner’s request to create a trunk.

show lacpstate

Shows the LACP state settings for each port.

enable lacp <1~4>

Enables LACP on the specified trunk(s).

disable lacp <1~4>

Disables LACP on the specified trunk(s).

delete trkgrp <1~4>

Deletes the specified trunk(s).

delete trkgrp <1~4> ports <1-8>

Removes the specified port(s) from a trunk.

show trkgrpcfg

Shows the configuration settings for all trunks.

show trkgrp

Shows trunk members, and additional information for LACP trunks.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 149 150

Brak uwag

SMC Networks SMC6709L2 Instrukcja Użytkownika Strona 131