Smc-networks ElliteConnect 2.4GHz/5GHz Instrukcja Użytkownika Pobierz pdf (Strona 254)

100

101

Command Line Interface

7-84

pppoe lcp echo-interval

This command sets the Link Control Protocol (LCP) echo interval

for the PPPoE tunnel.

Syntax

pppoe lcp echo-interval <interval>

interval - The interval between sending echo requests.

(Range: 1-60 seconds)

Default Setting

Command Mode

Interface Configuration (Ethernet)

Command Usage

• Echo requests are used to verify the integrity of the link

through the PPPoE tunnel. Devices at either end of the link

can issue an echo-request. Devices receiving an

echo-request must return an echo-reply.

• If a link is busy with large data transfers, the echo-reply may

not be issued in a timely manner causing the link to timeout.

If you experience this kind of problem, try extending the

echo interval or timeout.

Example

Related Commands

pppoe lcp echo-failure (page 7-85)

AP#(if-ethernet)#pppoe lcp echo-interval 30

AP#

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 321 322

Komentarze do niniejszej Instrukcji

Brak uwag

Smc-networks ElliteConnect 2.4GHz/5GHz Instrukcja Użytkownika Strona 254

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Smc-networks ElliteConnect 2.4GHz/5GHz