Smc-networks Barricade SMC2804WBRP-G Instrukcja Użytkownika Pobierz pdf (Strona 31)

Barricade g Wireless Router with USB Print Server Manual

8.5.2 | Special Applications

This section allows you to configure dynamic port forwarding rules by using an outgoing trigger

port.

Trigger Port: Enter in the outgoing port that will be used to open the public ports

Trigger Type: Choose the protocol type, TCP or UDP traffic.

Public Port: Set the Incoming Range of ports that will be opened by the outgoing trigger port data.

The maximum range that you can use for all NAT ports is 0 to 65535.

Public Type: Choose the protocol type, TCP or UDP traffic.

Enabled: You can enable or disable these rules as needed.

NOTE: For security, if you are not using a Special Applications rule, it is recommended that you

disable the rule until needed.

Need Port Info?

For a list of the ports required by some of the popular online games and other applications

please refer to Appendix C | SMC Port List for Games and Applications.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 69 70

Brak uwag

Smc-networks Barricade SMC2804WBRP-G Instrukcja Użytkownika Strona 31