Smc-networks Barricade Cable/DSL Router Instrukcja Użytkownika Pobierz pdf (Strona 10)

-9-

3. Connecting the Barricade with other hubs:

In case you do not need to connect with another hub, skip this step.

If you want to connect the Barricade with another hub, connect one of the ports 1-7 to

that hub by crossover Ethernet cable. If the hub you connected has an UPLINK port,

you can also connect the Barricade with straight-through Ethernet cable to that

UPLINK port.

4. Connecting the Barricade with your printer: use the printer cable to connect your

printer to the printer port of the Barricade.

5. Power on:

By connecting the power cord to power inlet and turning the power switch on, the

Barricade will automatically enter the self-test phase. When it is in the self-test phase,

the indicators M1 and M2 will be lit ON for about 5 seconds, and then M1 and M2 will

be flashed 3 times to indicate that the self-test operation has finished. Finally, the M1

will be continuously flashed once per second to indicate that the Barricade is in normal

operation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Brak uwag

Smc-networks Barricade Cable/DSL Router Instrukcja Użytkownika Strona 10