Smc-networks SMC TigerStack IV SMC6224M Instrukcja Użytkownika Strona 197

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 522
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 196
VLAN C
ONFIGURATION
3-143
Web – Click Spanning Tree, STA, Port Configuration or Trunk
Configuration. Modify the required attributes, then click Apply.
Figure 3-59 STA Port Configuration
CLI – This example sets STA attributes for port 7.
VLAN Configuration
IEEE 802.1Q VLANs
In large networks, routers are used to isolate broadcast traffic for each
subnet into separate domains. This switch provides a similar service at
Layer 2 by using VLANs to organize any group of network nodes into
separate broadcast domains. VLANs confine broadcast traffic to the
originating group, and can eliminate broadcast storms in large networks.
This also provides a more secure and cleaner network environment.
An IEEE 802.1Q VLAN is a group of ports that can be located anywhere
in the network, but communicate as though they belong to the same
physical segment.
Console(config)#interface ethernet 1/7 4-143
Console(config-if)#spanning-tree port-priority 0 4-189
Console(config-if)#spanning-tree cost 50 4-188
Console(config-if)#spanning-tree link-type auto 4-191
Console(config-if)#no spanning-tree edge-port 4-189
Console(config-if)#
Przeglądanie stron 196
1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 521 522

Komentarze do niniejszej Instrukcji

Brak uwag