SMC Networks SMC8011CM Instrukcja Użytkownika Pobierz pdf (Strona 16)

NSTALLING

THE

ODEM

The modem must be properly connected to the service provider’s cable

jack. If you are connecting both a TV and the modem to this outlet, you

will need to connect a splitter to the cable jack outlet. The splitter filters

the TV signal onto one cable and the network signal onto a second cable.

(See a typical example on page 9.)

1. Connect a splitter to the cable jack.

2. Connect a 75-ohm coaxial TV cable between the splitter and the cable

connector at the back of the modem. Ensure that you do not bend the

exposed center wire of the connector. Tighten both connectors by

hand.

3. Connect the modem to a surge-protected power source.

4. Connect the modem:

- to a computer using the USB connection. (See “USB Installation

in Windows 98/ME/2000/XP” on page 9)

- to a computer or Ethernet hub/switch using the Ethernet

connection. (See “Ethernet Installation in Windows” on page 10)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Brak uwag

SMC Networks SMC8011CM Instrukcja Użytkownika Strona 16